Click here for a printable PDF version of this page  

N. AMERICA
ISOFRAX MSDS BY NAME

N. AMERICA
ISOFRAX MSDS BY NUMBER

EUROPEAN COUNTRIES
ISOFRAX MSDS SEARCH

Isofrax products are characterized by, low thermal conductivity, low heat storage, excellent thermal shock resistance, light weight, excellent chemical stability, and high strength & flexibility. Thermal stability and low density make Isofrax products ideal high temperature insulation materials. Isofrax also exhibits superior wetting resistance to corrosive molten aluminum alloys than traditional alumino-silicate refractory ceramic fibers.

Isofrax 1260°C Blanket is applied as high temperature insulation in the metal, petrochemical / power, ceramic & glass production industries. Isofrax has a temperature rating for use up to 1260°C (2300°F), but the blanket can withstand short-term excursions to higher temperatures - with moderate shrinkage.

Isofrax 1260°C Blanket has excellent chemical stability and is unaffected by most chemicals except hydrofluoric & phosphoric acids, and concentrated alkalies. Despite it's high in-vitro solubility, if Isofrax 1260°C is wet by water or steam, thermal and physical properties remain unaffected after drying. Isofrax 1260°C Blanket also provides superior resistance to attack from molten aluminum alloys at high temperatures

Isofrax 1260°C Blanket Product Information Sheet
Isofrax 1260°C Blanket MSDS

Compared with traditional refractory furnace linings, Isofrax 1260°C high temperature insulation modules provide several advantages - including: rapid temperature cycling, lower heat storage, lower fuel costs, increased productivity, lower installed cost, and rapid & easy repair.

Isofrax 1260°C High Temperature Insulation Modules are used in heat-treatment / annealing / process furnace linings, slab & ingot covers, Aluminum homogenizing furnace linings & ladle covers, personnel heat shields, flue stack & duct linings, and field steam generator linings.

Isofrax 1260°C Anchor Loc ® Modules can be fitted with various Unifrax attachment options: Thread-Loc ®, Screw-Loc ®, and Weld-Loc ® Systems.

Isofrax 1260°C Modules Product Information Sheet
Isofrax 1260°C Modules MSDS

Isofrax 1260°C Paper exhibits excellent chemical stability and resistance to attack from most corrosive agents. Exceptions include hydrofluoric acid, phosphoric acid and strong alkalis. Isofrax 1260°C Paper also provides superior wetting resistance to molten aluminum alloys at high temperatures.

Isofrax 1260°C Paper generates only minor amounts of smoke and trace element outgassing during initial exposure to temperatures above 230°C (446°F).

Isofrax QSP TRUE GREEN Automotive Exhaust Insulation is a certified "True Green" insulation mat that was specifically designed to provide thermal management and noise reduction throughout the auto exhaust system.

Isofrax QSP Automotive Exhaust Insulation is available in 6mm nominal thickness, features high tensile strength, and, with only 4-7% loss on ignition, may be applied to 1000°C (1832°F).

Isofrax QSP Automotive Exhaust Insulation Product Information Sheet
Isofrax QSP Automotive Exhaust Insulation MSDS

Isofrax IsoMat AV5 TRUE GREEN substrate for automotive catalytic converter applications, was specifically designed to function as mechanical support for the ceramic substrate, and to act as an exhaust gas seal while providing thermal insulation. Isofrax IsoMat AV5 offers superior performance at low temperatures and has excellent thermal stability with a continuous use temperature of 750°C (1382°F) average mat temperature (Reference SAE Paper 2007-01-0471).

Isofrax IsoMat AV5 is an ideal solution for a wide range of emission control devices, including large diesel oxidation catalysts (DOC), diesel particulate filters (DPF), and selective catalyst reduction units (SCR), as well as gasoline oxidation catalysts, including ethanol (flex fuel) underbody converters.

Isofrax IsoMax 1 TRUE GREEN support mat system offers excellent thermal stability up to 750°C (1382°F) substrate skin temperature, and is capable of withstanding high-temperature excursions associated with diesel particulate filter regenerations. IsoMax 1 is therefore an ideal solution for a wide range of emission control devices, including large diesel oxidation catalysts (DOC), diesel particulate filters (DPF), selective catalyst reduction units (SCR), NOx traps and catalysts, as well as gasoline oxidation catalysts including ethanol or flex fuel underbody converters.

Isofrax IsoMat AV5 Product Information Sheet
Isofrax IsoMat AV5 MSDS
Isofrax IsoMax 1 Product Information Sheet
Isofrax IsoMax 1 MSDS

Isofrax Isofoam gunnable high temperature insulation is easily and quickly applied at rates up to 1000 board feet/hr. This monolithic high temperature insulation product complies with European regulations for vitreous soluble high temperature insulation fiber.

Foamfrax is a similar advanced fiber / foam high temperature insulation product, constituted with Fiberfrax refractory ceramic fiber, and suitable for service to 1538°C (2800°F).

Isofrax Isofoam High Temperature Insulation Product Information Sheet
Fiberfrax Foamfrax High Temperature Insulation Product Information Sheet
Isofrax Isofoam High Temperature Insulation MSDS
More Fiberfrax Foamfrax & Isofrax Isofoam Information On The Web
Fiberfrax Foamfrax & Isofrax Isofoam Applications Case Study List